Publicité
Les langues disponibles
Les langues disponibles
4. Safety precautions
• The warning triangle sign indicates all instructions which are important for safety. Always follow these otherwise
you could injure yourself or damage the device.
• Children may not play with the device.
• Cleaning and user maintenance may not be carried out by children without supervision.
• Do not treat packaging material carelessly. This may become a dangerous plaything for a child!
• Only use this product for its designated purpose!
• Do not manipulate or disassemble the device!
• For your own safety, only use accessories or spare parts that are stated in these instructions, or that are
recommended by the manufacturer!
• Please observe the safety instructions of your bicycle rack.
5. Operating instructions
5.1 Overview
1
Knurled nut
2
Link screw
3
Guiding ridge
4
Turnbuckle
5
Unlocking lever
6
Tensioning belt
7
Rim protector
5.2 Preparation
Before you are able to use the wheel stopper set, you must first remove the standard wheel stopper of your bicycle rack.
To do so, proceed as follows:
-
Remove the bicycle from the bicycle rack.
-
Release the knurled nut from the standard bicycle rack.
-
Push the wheel stopper towards the inner end of the wheel rail and use it push the end cap out of the wheel rail.
-
Pull the wheel stopper out of the wheel rail.
5.3 Mounting the wheel stoppers
- In the new wheel stoppers for wide tyres, the centre of the bicycle tyre is
shifted by approx. 1 cm to the centre of the wheel rail. Insert the new wheel
stopper with the guiding ridge (Position 3 in the overview) into the wheel rail
so that the bicycle tyre is positioned away from the carry handle. See Figure 2.
- The wheel stoppers for the other half the wheel rail are used accordingly.
- Replace the end caps.
If you want to use a wheel stopper set on another bicycle rail of the bicycle rack, it must be assembled accordingly. I.e. the
wheel stoppers must be assembled so that the wheel of the bicycle is fastened away from the carry handle.
CAUTION:
The wheel stoppers must always be located between the wheels of the bicycle, never in front of behind.
All manuals and user guides at all-guides.com
Image 1: Overview
Image 2: Displacement
5
Publicité
