Publicité
SOLID DECKING MOUNTS
Suggested application: ideal for hanging on cross bars in a rack system
with solid decking. Offset version available with drip/flood trays. Hardware
included: Solid decking mounts.
For proper uniformity and flexibility for adjustments, position SPYDR with light
bars parallel to the length of the rack.
To mount your SPYDR using solid decking mounts, place SPYDR fixture
1
gently below the desired hanging area . Adjust cross bars approximately
2 .5 ft – 3 ft along the rack, roughly five inches from the edge of the
SPYDR module .
Lift decking to loop each mount on the cross bar, positioned above light
2
bar located second from the end .
NOTE: do not attach mounting hardware to the end light bars.
RACK
7
Publicité
