Publicité
REMOTE MOUNTING THE POWER SUPPLY (2X, 2P)
1
Take (2) mounting brackets and hang a bracket over the support
structure . Locate the holes for brackets on the narrow side of
PSU power supply, hold up the power supply under the support
structure under it .
2
While maintaining a firm grip on both, pinch the bottom of the
bracket inward and horizontally insert it into the receiving holes
on the PSU power supply, release the tension of the bracket .
3
Lift the ends of the brackets up to a 90° angle . Repeat above
steps to install another bracket on the PSU power supply .
12
2
1
4
3
Publicité
