Télécharger Imprimer la page

FLUENCE SPYDR 2 Serie Mode D'emploi page 15

Publicité

CAUTIONS & WARNINGS
WARNING
Turn off and disconnect the power before installation . Installation should be performed by a qualified electrician in accordance with all national and
local electrical and construction codes and regulations .
• DO NOT attempt to install or use this product until you have fully read and understand the installation instructions contained in this user and
installation guide and on the product safety labels . Failure to follow the Fluence product instructions and safety label advice may result in damage
to the product, damage to property, or personal injury . Be sure to retain a copy of this user guide after installation for future reference .
• Risk of Electrical Shock . Turn off and disconnect the power before installing, moving, or cleaning to reduce the possibility of serious injury . DO
NOT disconnect cables from the power supply or LED light bar while energized .
• Only connect the system to an electrical outlet or circuit of appropriate type and rating for the cord and plug . Connect the system only to power
sources of the correct voltages and frequencies listed in the product specifications .
• Protect power cables from being pinched, walked on, or otherwise damaged .
• Use a strain-relief or power cord grip if needed . Maintain a minimum of 1" (2 .5 cm) bend radius for all cables .
• Use IP wet-rated junction boxes and fittings for the power cords equal to the IP rating of the rating of the lighting system for the application .
• DO NOT connect to live power until installation is complete and all connections are made .
• DO NOT modify or alter the product; doing so will void the warranty . Please refer to the Fluence Terms and Conditions and Limited Warranty for
further details .
• LED and heatsink surfaces may be hot . DO NOT touch while in operation . Allow sufficient cooling time before handling .
• To reduce the risk of overheating or fire, never place operating fixtures face down on a flush surface . Always allow for adequate ventilation of fixtures and
power supplies .
15

Publicité

loading

Produits Connexes pour FLUENCE SPYDR 2 Serie

Ce manuel est également adapté pour:

Spydr 2xSpydr 2p