Publicité
WATERFALL MOUNTS CONTINUED
Loop mounting hardware on the lower wire deck . Installing on the lower
2
deck allows for slight adjustments when fixture is mounted to ensure
fixture is centered over your canopy .
Once all four brackets are in place, use two people to lift the fixture
3
up to the mounting hardware . Slightly separate mounting hardware
until the black hooks slide over the light bar to securely grip the bar .
4
Adjust SPYDR module to ensure full contact is made on the hooks of
the mounting hardware .
5
With all four mounting brackets attached to the SPYDR module, you can
adjust the mounting hardware along the waterfall deck or adjust the
SPYDR module along the contact points on the mounting hardware to
center on the 4' x 4' area .
6
Publicité
