Miele A 600 Mode D'emploi page 42

en - Warning and Safety instructions
42
To avoid the risk of accidents and damage to this module please
read these instructions carefully before using it for the first time.
Keep these instructions in a safe place where they are accessible
to users at all times.
 Please also read the operating instructions for your washer-
disinfector and pay particular attention to the Warning and Safety
instructions.

The module is approved solely for the applications specified in the
operating instructions. Components such as nozzles may only be re-
placed with Miele accessories or genuine Miele original spare parts.
Alterations or conversion of the machine, or using it for purposes
other than those for which it was intended, are not permitted and
could be dangerous.

The load carrier is set up by Miele during the commissioning
process.

New load carriers must be cleaned in the washer-disinfector
without a load prior to first use.

Inspect all load carriers as described in the "Maintenance" section
in the operating instructions for the cleaning machine.

Any hollow items that have become disconnected from their
injector nozzles, adapters or holders during processing must be
re-processed.
Miele cannot be held liable for damage caused by non-compliance
with these Warning and Safety Instructions.