Empire Comfort Systems DVCTL60CFP95N Instructions D'installation page 38

MULTIFUNCTION REMOTE OPERATING INSTRUCTIONS
Blower Control (Fan)
If the appliance is equipped with a hot air circulating fan, the
speed of the fan can be controlled by the Proflame system. The
fan speed can be adjusted through six speeds. To activate this
function, use the Mode Button Figure 68 to index the fan control
icon. See Figure 80. Use the Up/Down Arrow Buttons Figure 68
to turn on off or adjust the fan speed. See Figure 81. A single
"beep" will confirm reception of the command.
OFF
OFF
Remote Dimmer Control (Light)
The auxiliary function controls the power light outlet by the dimmable
light control. To activate this function, use the Mode Button Figure
68 to index to the light icon. See Figures 82 and 83.
The intensity of the output can be adjusted through six levels. Use
the Up/Down Arrow Buttons Figure 68 to adjust the output level. A
single "beep" will confirm reception of the command.
NOTE: This function is available only with the IFC control Module.
OFF
Page 38
Figure 80
Figure 81
Figure 82
OFF
Split Flow Control
The secondary burner is controlled by the split Flow. To activate
this function use the Mode Button Figure 68 to index to the SPLIT
FLOW mode icon. See Figures 84 and 85.
Pressing the Up Arrow Button will activate the secondary burner.
Pressing the Down Arrow Button will turn the secondary burner off.
A single "beep" will confirm the reception of the command.
OFF
OFF
Figure 83
Figure 84
Figure 85
43902-0-1021