Empire Comfort Systems DVCTL60CFP95N Instructions D'installation page 37

MULTIFUNCTION REMOTE OPERATING INSTRUCTIONS
OFF
Flame Level Maximum - Figure 75
The Thermostat Feature May Be Disabled If Desired.
With all three AAA type batteries installed:
1. Take out one AAA battery.
2. While re-inserting the AAA battery, Push and hold down the
thermostat button. This will disable the thermostat feature on
the transmitter.
Room Thermostat (Transmitter Operation)
The Remote Control can operate as a room thermostat. The
thermostat can be set to a desired temperature to control the
comfort level in a room. To activate this function, press the
Thermostat Button. See Figure 68. The LCD display on the
Transmitter will change to show that the room thermostat is "ON"
and the set temperature is now displayed. See Figure 76. To
adjust the set temperature, press the Up or Down Arrow Buttons
until the desired set temperature is displayed on the LCD screen
of the Transmitter. See Figure 77.
ROOM TEMPER ATURE
SET TEMPERATURE
43902-0-1021
Figure 76
Figure 77
Smart Thermostat (Transmitter Operation)
The Smart Thermostat function adjusts the flame height in accor-
dance to the difference between the set point temperature and the
actual room temperatures. As the room temperature gets closer to
the set point the Smart Function will modulate the flame down. To
activate this function, press the Thermostat Button until the word
"SMART" appears to the right of the temperature bulb graphic. See
Figure 78. To adjust the set temperature, press the Up or Down
Arrow Buttons until the desired set temperature is displayed on the
LCD screen of the Transmitter. See Figure 79.
NOTE: When Smart Thermostat is activated, manual flame height
adjustment is disabled.
Figure 78
Figure 79
Page 37