Empire Comfort Systems DVCTL60CFP95N Instructions D'installation page 15

3. Remove burner base. See Figure 11.
Remove Blower Brackets by taking out (6) screws each. See
4.
Figure 12.
5. Place Blower onto Blower Brackets. See Figure 13.
.
43902-0-1021
BLOWER INSTALLATION (CONT'D)
Figure 11
Figure 12
Figure 13
6. Bend tab as shown in Figure 14 and secure with (2) screws.
HAND BEND
TAB INWARD
HAND BEND
TAB INWARD
7. Remove protective connectors on Wire Assembly from fireplace
and discard. Connect Wire Harness to both blowers and the
other end to the Wire Assembly supplied with the fireplace. See
Figure 15.
8. Replace Blower Bracket (w/ blowers attached) with (6) screws
each. See Figure 16.
9. Replace Glass Frame, Screen Barrier, and liners removed in
Step 1, Figure 9.
Figure 14
WIRE TO ASSEMBLY
(MODULE)
Figure 15
WIRE TO ASSEMBLY
(MODULE)
Figure 16
Page 15