Publicité
Les langues disponibles
Les langues disponibles
English
Fueling
Before fueling, clean the filler cap and
the area around it to ensure that no dirt
falls into the tank.
Position the machine so that the filler
cap is facing up.
Always thoroughly shake the mixture in
the canister before fueling your
machine.
In order to reduce the risk of burns
or other personal injury from
escaping gas vapor and fumes,
remove the fuel filler cap carefully
so as to allow any pressure build-up
in the tank to release slowly.
12
All manuals and user guides at all-guides.com
Opening the cap
:
Swing the grip 90° to the upright
position.
:
Turn the cap counterclockwise
(about a quarter turn).
:
Remove the filler cap.
Closing the cap
:
Insert the cap in the opening – with
the grip upright – the marks must
line up.
:
Turn cap clockwise as far as stop
(about a quarter turn).
:
Fold the grip down so that it is flush
with the top of the cap.
If the grip does not lie completely flush
with the cap and the lug on the grip does
not engage the recess in the filler neck
(arrow), the cap is not properly seated
and tightened and you must repeat the
above steps.
HS 86 R, HS 86 T
Publicité
