Philips Perfective GC5010 Mode D'emploi page 11

All manuals and user guides at all-guides.com
Preparing for use
Inserting and removing the cartridge
Inserting the cartridge
C
1
C
2
Make sure the compartment is dry before you
insert the cartridge.
After you have inserted a new cartridge, some
foam may come out of the spray nozzle during
the first few seconds of spraying.
Removing the cartridge
When the cartridge is empty, remove and
discard it and replace it with a new cartridge.
When the cartridge and/or the water tank is
B
empty, you will hear a pumping sound and some
foam will come out of the spray nozzle.This is a
signal that the cartridge needs to be replaced
and/or the water tank needs to be refilled.
If this happens, stop pressing the spray button
immediately.
Remove the rubber seal from the cartridge
completely.
Insert the cartridge into the cartridge
compartment by pressing it firmly until
you hear a click.
ENGLISH
9