Use Of The Hand Control; Select Your Language; Locking The Hand Control Setting; Start/Stop/Reverse Function - Kinetec Breva Manuel D'utilisation

Beginning
Switch the unit ON
Press the 2 keys in the same time
To change the language
To validate the new language.
The hand control allows the patient to control the machine as appropriate.
Simultaneously press the
The display reads "LOCK", you can not change the parameters, if you try the display reads "LOCK".
To unlock the hand control, simultaneously press the
Comment: The hand control is unlocked when you switch the unit ON/OFF.
As with all KINETEC systems, KINETEC Breva is equipped with a START/STOP/REVERSE function.
When the unit is running, the display reads RUN
Press the
Press the
RUN.
For optimum safety, always give the hand control to the patient before starting the system.
Keys to press
or
and
We recommend that you lock the hand control when you give it to the patient.
key of the hand control. The movement stops. The display reads STOP.
key of the hand control. The movement starts in the opposite direction and the display reads
Display
KINETEC
BREVA V01.0
PL/FLEX DOR/FLEX
Please wait
PL/FLEX DOR/FLEX
20 STOP 0 20
Language:
english
Language:
french
Ok
Switch on/off
keys to lock the hand control,
and keys, the display reads "UNLOCK".

START/STOP/REVERSE function

Caution:

Use of the hand control

Select your language

Remarks
The display indicate the language selected.
The English language is selected.
English
French
German
Italian
Spanish
To exit and confirm the new language,
switch OFF and Switch ON the unit.

Locking the hand control setting

GB
5