Quick Start; Possible Values For Each Parameter - Kinetec Breva Manuel D'utilisation

Use of the hand control

Quick Start

Set up the patient and proceed as below:
Beginning
Switch the unit ON
To select the Inversion/Eversion movement
To select the Extension/Flexion movement
Start the session with the original parameters of the
movement (default setting).

Possible values for each parameter

• Lower limit
• Upper limit
• Speed
• Load
• Upper Pause
• Lower Pause
• Timer
Default setting values for each parameter
• Lower limit
• Upper limit
• Speed
• Load
• Upper Pause
• Lower Pause
• Timer
GB
6
Keys to press
PL/FLEX
Please wait
PL/FLEX
20
Inversion/Evers.
Right :+
EV
10
Or
INV
10
PL/FLEX
20
PL/FLEX
20
Extension/Flexion
Plantar Flexion 40°
Dorsiflexion 25°
Plantar Flexion 35°
Dorsiflexion 30°
1 to 5 (from 50 to 150° per minute)
0 to 900 seconds (15 minutes)
0 to 900 seconds (15 minutes
No timer (00H00) to 24H00
Extension/Flexion
Plantar flexion 20°
Dorsiflexion 0°
No timer (00H00)
Display
KINETEC
BREVA V01.0
DOR/FLEX
DOR/FLEX
STOP 0 20
Left :-
RIGHT INV
stop 0 10
LEFT EV
stop 0 10
pl/FLEX
STOP 0 0
pl/FLEX
RUN 3 0
Inversion/Eversion
Right Foot: 25° to 20°
Left Foot: 25° to 20°
Right Foot: 20°to 25°
Left Foot: 20° to 25°
1 to 6
Inversion/Eversion
10° of Inversion or Eversion
according the foot
10° of Eversion or Inversion
according the foot
2
6
0
0
Remarks
The display indicates the last movement
selected.
The display shows the movement selected
and then to choose the foot side (+ for right
or – for left).
The display shows the movement with the
default settings.
The value change at the speed of the
movement.