Adjusting the Picture Quality
Restoring the initial data
Adjust the picture for your preference. The adjustment data can be saved in
the memory.
1
Adjust with the PICTURE CONTROL +/– keys.
BRIGHT
CONTR
COLOR
HUE
SHARP
The adjustment levels are digitally displayed with a range of MIN, 1, 2,
... 99, MAX.
B R I G H T : 5 0
2
Press the MEMORY key to save the data.
Dynamic picture mode (only for the video or component input
pictures)
You can get high-quality picture contrast by setting D.PICTURE to ON in
the PIC CTRL menu.
For details, see "PIC CTRL (Picture Control) Menu" on page 45 (EN).
1
Press the PICTURE CONTROL key of the item which you want to
reset to the initial data.
2
Press the RESET key.
The selected item is reset to the initial data.
Notes
• The COLOR, SHARP and HUE keys do not function on the pictures input from
the RGB IN connectors.
• The HUE and COLOR keys do not function if the input signal is black and
white.
• The HUE key does not function with the PAL or SECAM color input source.
Brightness
Picture contrast
Color intensity
Hue
Sharpness
103
Adjustments
(EN)