Sony VPH-D50Q Manuel D'installation page 12

Installation Diagrams
Attaching the PSS-70 Projector Suspension Support
Installation dimensions
12
(EN) Installation
Attach the projector mounting bracket to the bottom surface of the
projector.
Use five each of the M8×20 bolts, M8 washers and spring washers, all of
which are supplied with the PSS-70.
1
Align the two projections on the projector mounting bracket with the
receptacles on the bottom surface of the projector.
2
Fasten the five bolts and washers to fix the mounting bracket to the five
holes for attaching the PSS-70 on the bottom surface of the projector.
For attaching the PSS-70 to the ceiling, refer to the Installation Manual of the
PSS-70 Projector Suspension Support.
254 (10)
M8×20 bolt
Spring washer
M8 washer
Projector
mounting
bracket
254
7
301.8 (11 / )
8
(10)
3
263.8 (10 / )
8