Sony VPH-D50Q Manuel D'installation page 94

Fine Adjustment for Each Input Signal
Fine registration adjustment
SIZE adjustment
SHIFT adjustment
94
(EN) Adjustments
1
Press the PATTERN key to display the CROSS HAIR pattern.
2
If necessary, fine adjust the registration.
For details, see "Adjusting the Registration" on pages 68 (EN) to 90 (EN).
3
When you connect two or more RGB input sources, fine adjust the
registration for each input signal.
4
Press the MEMORY key and release it to save the adjustment data.
Adjust the picture size if it does not fit the screen.
1
Press the RGB SIZE key.
2
Adjust the picture size with the arrow keys.
V : The vertical size is expanded.
v : The vertical size is reduced.
b :The horizontal size is expanded.
B :The horizontal size is reduced.
R G B S I Z E A D J
H c : 8 0
H f : 8 0
V c : 8 0
V f : 8 0
3
Press the MEMORY key to save the adjustment data.
If the picture needs to be shifted to fit the screen, adjust the RGB SHIFT.
1
Press the RGB SHIFT key.
2
Select the adjustable range of the vertical shift (V SHIFT) with the
POSITION +/– keys.
WIDE: Normally, set to this position.
NARROW: Set to this position to make the adjustable range in the
vertical direction narrow.
Picture
Screen
ADJ: