Télécharger Imprimer la page

IKEA RENLIG IWM60 Mode D'emploi page 19

Masquer les pouces Voir aussi pour RENLIG IWM60:

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH
• place a bowl on the floor and place the
end of the emergency emptying hose into
the bowl. Remove its cap. The water
should drain by gravity into the bowl.
When the bowl is full, put the cap back
on the hose. Empty the bowl. Repeat the
procedure until water stops flowing out;
What to do if...
The appliance does not start or stops during
operation. It is possible that the red indica-
tor light of button 5 blinks to indicate that
the appliance is not working.
Problem
Possible cause
The door has not been closed (The
red indicator light of button 5
blinks).
The plug is not properly inserted in
the power socket.
There is no power at the socket.
The appliance
does not start:
The main fuse has blown.
The programme selector dial is not
correctly positioned and the button
5 has not been pressed.
The delay start has been selected.
The water tap is closed The red in-
dicator light of button 5 blinks).
The inlet hose is squashed or
kinked (The red indicator light of
button 5 blinks).
The appliance
The filter in the inlet hose or the in-
does not fill:
let valve filter are blocked (The red
indicator light of button 5 blinks).
The door is not properly closed
(The red indicator light of button 5
blinks).
The drain hose is squashed or
The appliance
kinked (The red indicator light of
does not emp-
button 5 blinks).
ty:
All manuals and user guides at all-guides.com
• clean the pump if necessary as previously
• replace the emergency emptying hose in
• screw the pump cover again and close
Before contacting your local Service Centre,
please carry out the checks listed below.
described;
its seat after having plugged it;
the door.
Solution
Close the door firmly.
Insert the plug into the power
socket.
Please check your domestic electri-
cal installation.
Replace the fuse.
Please turn the selector dial and
press the button 5 again.
If the laundry are to be washed
immediately, cancel the delay
start.
Open the water tap.
Check the inlet hose connection.
Clean the water inlet filters. (See
"Cleaning the water inlet filters"
for more details).
Close the door firmly.
Check the drain hose connection.
19

Publicité

loading