Carson Nitrobone Automatic Mode D'emploi page 13

e. Turn the Power Switch on
Pull the transmitter antenna out completely.
The range of the remote control is reduced if the antenna is not
pulled out completely.
CAUTION!
Always turn the transmitter´s power switch ON first!
Switch on the receiver
• The power switch is on the radio box.
• Fix the receiver antenna pipe and put through the wire.
• Put the body on and fix it with the body split pins.
f. How to Control your Model
• Raise the tyres off the ground.
• Turn the steering wheel to the right and left as far as it will
go. The wheels are to follow the steering direction.
• If the wheels operate in the opposite direction, operate the
servo Reverse switch (ST in position REV).
• To regulate the driving speed, actuate the throttle/brake
- backwards (forward driving, accelerating) or
- forwards (braking, reversing).
CARSON Automatic RTR: Nitrobone 50 010 3021 Stormracer 50 010 3022
All manuals and user guides at all-guides.com
Picture 9
Neutral
Right
Left
GB
ON
13