Publicité
Les langues disponibles
Les langues disponibles
GB
Flexible Nozzle Extension (Illus.7)
For spraying ceilings, resting objects or hard-to-reach areas e.g. radiators
Pos
Name
1
Suction tube
2
Paint container with cover
3
Nozzle 0,8 mm
4
Locking nut
5
Valve
6
Pump housing
7
Piston spring
8
Piston
9
Nozzle spanner
10
Viscosity measuring cup
Correction of Malfunctions
Problem
Spray gun buzzes
and does not work
Spray gun does not
suck in
Spray gun sucks in
but does not spray
Spray gun works but
sprays unevenly
Environmental protection
The appliance and accessories should be recycled in an environmentally
friendly way. Do not dispose of the appliance with household waste. Support
environmental protection by taking the appliance to a local collection point or
obtain information from a specialist retailer.
14
Spare Parts List (Illus. 8)
Cause
•
Piston stuck
•
Defective drive
•
No valve in the pump
•
Nozzle clogged
•
Ducts and holes in atomiser
clogged
•
Spray material in container
running out
•
Spray gun held inclined
leading to sucking in of air
•
Viscosity of spray material too
high (too thick)
•
Fine adjustment button not
set correctly
•
Nozzle worn out
•
Valve worn out
•
Wrong valve inserted
Order No.
0413 305
0413 909
0046 903
0413 310
0209 042
0412 210
0033 028
0198 207
0199 327
0209 058
Remedy
Disassemble pump and
➞
clean with thinner
Send spray gun to
➞
customer service center
Insert valve
➞
Clean
➞
Clean
➞
Refill
➞
Use flexible nozzle
➞
extension (see accessories)
Dilute accordingly
➞
Reset according to spray
➞
material
Replace
➞
Replace
➞
Use correct valve
➞
W 140 P
Publicité
