Télécharger Imprimer la page

JVC HX-GD8 Manuel D'instructions page 22

Publicité

Les langues disponibles

Les langues disponibles

GAMMA
Adjust if the neutral color is bright or
dark. The brightness of dark and
bright portions is maintained
(–3 to +3).
BRIGHTNESS
Adjust if the picture is bright or dark
as a whole (–8 to +8).
CONTRAST
Adjust if the far and near position is
unnatural (–7 to +7).
SATURATION
Adjust if the picture is whitish or
blackish (–7 to +7).
TINT
Adjust if the human skin color is
unnatural (–7 to +7).
SHARPNESS
Adjust if the picture is indistinct
(–8 to +8).
3
Adjust the parameter.
4
Repeat steps 2 to 3 to adjust other parameters.
5
Finish setting.
Turning On or Off the Key-Touch Tone
Remote control:
BEEP OFF
BEEP ON
Changing the Display Brightness
You can dim the display window.
Setting the Clock
Main Unit
ONLY
Without setting the build-in clock, you cannot use Daily/
Recording Timers (see page 32) and Sleep Timer (see next
column).
• To exit from the clock setting, press CLOCK/TIMER as
required.
• To go back to the previous step, press CANCEL/DEMO.
18
Main unit:
2
sec.
BEEP OFF
/BEEP
BEEP ON
Remote
ONLY
INFO
1
Activate clock setting mode.
CLOCK
/TIMER
• If you have already adjusted the clock before, press the
button repeatedly until the clock setting mode is
selected.
2
Adjust the hour.
3
Adjust the minute.
Now the built-in clock starts working.
To check the current time during play
2
sec.
SET
/DISPLAY
Source information
Turning Off the Power
Automatically
With Sleep Timer, you can fall asleep listening to music.
• You can set Sleep Timer only while the System is turned
on.
1
Specify the time (in minutes).
SLEEP 10 SLEEP 20 SLEEP 30 SLEEP 60
Canceled
2
Wait until the set time goes off.
To check the time remaining until the shut-off time
• If you press the button repeatedly, you can
change the shut-off time.
SET
/DISPLAY
SET
/DISPLAY
Clock
Remote
ONLY
INFO
SLEEP 120
SLEEP 90

Publicité

loading