Publicité
Les langues disponibles
Les langues disponibles
Stator
PCBA
LED Assembly
On-Off Switch
Left Housing Halve
Battery Terminal
Block
Be sure that all mechanical and electrical
components are placed firmly and squarely in
corresponding cavities of left housing halve.
Be very careful and make sure that all wires
and wire ribbons are placed firmly down in
wire channels and traps.
Make sure there are no interferences when
installing the right housing halve.
Prior to installing battery, check for proper
functionality of shuttles and on-off switch.
Install battery and assure the tool operates
correctly.
ATTENTION
OBSERVE PRECAUTIONS
NOTE:
Service replacement of Electronics Assembly
has two possible switch designs. Even
though the wiring may be a little different, the
service replacement electronics assembly is
completely interchangeable with the produc-
tion assembly. Be sure to follow the instruc-
tions above.
FOR HANDLING
ELECTROSTATIC
SENSITIVE
DEVICES
Publicité
