Télécharger Imprimer la page

Electrolux WASL 3 T Notice D'utilisation page 37

Masquer les pouces Voir aussi pour WASL 3 T:

Publicité

Les langues disponibles

Les langues disponibles

Dispenser box
SAFETY INFORMATION
Please read these points carefully before in-
stalling and using your appliance. Keep this
user manual with your appliance.
General safety
• Do not modify or attempt to modify this
appliance. This would put yourself in dan-
ger.
• Ensure that all coins, safety pins, brooch-
es, screws etc have been removed be-
fore starting a washing programme. If left
in washing, they can seriously damage
the appliance.
• Use the recommended quantity of deter-
gent.
• Put small items together (socks, belts
etc.) in a small linen bag or pillow case.
• Unplug and close inlet hose tap after us-
ing appliance.
• Always disconnect the power supply
from the appliance before cleaning or
maintenance.
• Do not machine wash clothes with rib-
bing, unfinished or torn material.
Installation
• Unpack or ask for the appliance to be un-
packed immediately upon delivery.
Check the outside of the appliance is not
damaged in any way. Report all transit
damage to your retailer.
• Remove all transit bolts and packaging be-
fore installing the appliance.
• Connection to the water supply must be
carried out by a qualified plumber.
• If your domestic electrical circuit needs
adapting to allow the appliance to be plug-
ged in, use a qualified electrician.
• Ensure that, after installation, the power
cable is not trapped under the appliance.
All manuals and user guides at all-guides.com
Prewash
Wash
Softener (do not fill above the MAX symbol
• If the appliance is installed on carpeted
• The appliance must be equipped with an
• Before connecting your appliance to the
• Replacing the power cable should only
• The manufacturer cannot be held respon-
Precautions to be taken against frost
If your appliance is exposed to tempera-
tures below 0°C, the following precautions
must be taken:
• Close the tap and disconnect the inlet
• Place the end of this hose and the drain
• Select the Drain programme let it run until
• Disconnect the appliance from the power
• Unplug the appliance.
• Replace the inlet hose and drain hose.
This way, the water remaining in the hoses
will be drained away, avoiding any ice forma-
tion which would damage your appliance.
Before turning your appliance on again, en-
sure that it is installed in an area where the
temperature will not fall below freezing.
floor, ensure that the carpet does not ob-
struct any ventilation ducts located at the
base of the appliance.
earthed power plug which conforms to
regulations.
power supply, carefully read the instruc-
tions in the chapter entitled "Electrical con-
nection".
be carried out by an authorised service en-
gineer.
sible for any damage resulting from incor-
rect installation.
hose.
hose in a basin on the floor.
the end of the cycle.
supply by turning the programme selec-
.
tor to "Stop"
electrolux 37
M
)

Publicité

loading