Operating A Computer From The Remote Commander - Sony VPL-S500U Mode D'emploi

Operating a Computer from the Remote Commander

When using an IBM PC/AT compatible computer
For details, see the supplied RM-PJ21 operating instructions.
Front
..........................................................................................................................................................................................................
1) IBM PC/AT is a registered trademark of International Business Machines Corporation, U.S.A.
If you connect the supplied mouse receiver to the mouse port of a
computer, you can operate the mouse function of a computer with the
Remote Commander.
Set the MOUSE/MENU switch to MOUSE when you operate a computer
connected to the mouse receiver from the Remote Commander.
When the MENU/MOUSE switch is set to MOUSE, the MENU, ENTER
keys and joy stick on the Remote Commander function as follows.
Key and joy stick
IBM PC/AT
compatible, Serial
MENU Left button
ENTER (front) Right button
ENTER (rear) Right button
Joy stick Corresponds with the movements of the mouse
Computer
Cable for IBM PC/AT
compatible computers
or cable for Macintosh
computer
to mouse port
When your computer has a serial port, you
can directly connect the mouse receiver cable
to the port.
When you connect to the IBM PC/AT
compatible or Macintosh computer, use the
supplied conversion cables .
Computer
IBM PC/AT compatible
Cable for IBM (for PC/AT
Conversion
compatible computer, PS/2
cable
type)
(Mini DIN 6-pin˜D-sub 9-pin)
Note
Be sure that there is nothing to obstruct the infrared beam between the
Remote Commander and the mouse receiver.
Function
1)
Macintosh
Mouse button
Mouse button
Mouse button
Mouse receiver
Macintosh
Cable for
Macintosh
(Mini DIN 4-pin˜
D-sub 9-pin)
15
(EN)