Adjusting The Milk Quantity - SEVERIN Fino Latte KA4565 Mode D'emploi

Fino Latte KA4565
30
7. Please wait until your appliance has completed the follow-up time, i.e.
the display element (H.1)
generated.
8. Then, remove your cup, fold the bracket closure upwards and remove
the strainer support from the appliance for cleaning.
9. Ready! Enjoy your hot milk.
Advice: For an easier cleaning submerge the tube (D.3) directly after
preparation into a container with hot water. Put a suitable container under
the outlet. Then start the operation by pressing the Start/Stop key (H.3)
Thus, the strainer support for milk is cleaned quickly and simply.

Adjusting the milk quantity

When the preparing process is started, press and hold the Start/Stop button
(H.3) until the desired milk quantity is reached. The display element
(H.1) is lit during this process. When you release the Start/Stop button
(H.3) the respective milk quantity will be memorised.
Note: After having released the Start/Stop button (H.3)
be coming out a little quantity of milk.
Note: If you change the milk quantity, the setting for the milk froth
quantity will change too, since the same strainer support is used.
stops flashing. A short acoustic signal is
.
there will still