Preparation Of Beverages - SEVERIN Fino Latte KA4565 Mode D'emploi

Fino Latte KA4565

3. Preparation of beverages

26
The appliance is ready for operation as soon as it is connected to the mains
supply. All display elements are off.
Danger of scalding!
During the frothing of the milk hot steam comes out. After preparation
of beverages remove the strainer support (C or D) from the brewing unit
(A) by merely holding it at the handle, since the support itself and the
coffee pad are hot.
Important: Please check if sufficient fresh, cold water (without gas) is
in the water reservoir (L). Please change water on a daily basis. Insert
the drainage grille (G) with or without drip tray (F), depending on
the size of the cup. Do not remove the water reservoir (L) during the
brewing process.
Important: The brewing process can be terminated any time by
pressing again the Start/Stop button (H.3)
Note: Please remember to empty and clean the strainer support (C or D)
after use. Dispose biodegradable components with your organic waste.
.