arjo Alpha Active 3 Manuel D'utilisation page 9

Detachable Cover
Cells
CPR function
Tube-set
Overlay Base Cover
The standard cover comprises of a 2-way stretch polyurethane
(PU) coated knitted fabric zipped to a durable nylon base. The
zips are protected by flaps to prevent ingress of contaminants
and allow easy removal of the cover for cleaning.
The mattress comprises of 16 polyurethane (PU) cells, 13
providing support to the user in either Alternating (Active) or
Static (Reactive) mode and 3 Static head cells.
NOTE
The head cells are not involved for alternating, so these cells
don't provide pressure ulcer management function.Check
patient head area on a regular basis and be vigilant to skin issue
are necessary to patient care.
A CPR (Cardio-Pulmonary Resuscitation) control is positioned at
the head end of the mattress to allow rapid deflation of the
mattress overlay.
The tube-set has a 2-way pneumatic connection which
incorporates a flexible, compact anti-kink tube that is resistant to
crushing and any subsequent obstruction of air flow.
When disconnecting the tube-set, place the attached cover over
the end to place the mattress in transport mode.
The base cover for the mattress overlay is PU coated nylon on
the underside. Four corner retention straps are incorporated,
which slide under the corners of the base mattress.
A full technical description of the Alpha Active 3 system can be
found in the Service Manual, part number SER0017, available
from your Arjo sales office.
3