arjo Alpha Active 3 Manuel D'utilisation page 11

3. Installation
Preparing the system
for use
Installing the Mattress
Do not use the mattress overlay directly on the bed frame.
Mattress Overlay
To Complete the
Mattress Installation
Remove the system from the packaging. You should have the
following items:
• Alpha Active 3 pump including mains power cord and
hanging brackets.
• Alpha Active 3 mattress overlay with integral tube-set.
• Cover.
Caution
The Alpha Active 3 mattress overlay system should be installed
as follows:
1. Place the overlay on top of the base mattress, with the
tube-set located near the foot end of the bed and the CPR
at the head end. The cells of the mattress must be
uppermost.
2. Secure the overlay to the base mattress by placing the four
long straps under the corners of the base mattress.
Complete the installation of the mattress overlay as follows:
1. If not already fitted, place the protective cover over the
mattress. Ensure that the logo is uppermost and at the foot
end of the mattress.
2. Zip the cover onto the mattress starting from the head end
and taking care not to trap any material in the zip.
3. Ensure that the CPR unit is secured in it's closed position.
NOTE
The CPR must be accessible at all times.
5