EUROM Cool-Eco 90A++ Wifi Manuel D'installation Rapide page 18

1.
In order to use the Smart App, your device must be
added once to the App. Select + top right of the screen.
2.
The Wifi light on the air conditioner should flash to establish a connection between
the air conditioner and the Eurom Smart App. If the Wifi light does not flash, a
connection cannot be made. There are 4 possibilities:
The Wifi light flashes rapidly (2-3 times per second)
The air conditioner is ready to establish a connection with the Eurom Smart App.
Continue with Step 3.
The Wifi light flashes slowly (1x per 2-3 seconds)
Switch to flashing rapidly:
Coolperfect 90/120/180 Wifi:
Put your air conditioner in stand-by mode. The plug is in the wall socket. Do not
press the On/Off button. Press the <SPEED> button for 5 seconds. The WiFi light
on the air conditioner will switch from flashing slowly to rapidly. Continue with Step
3.
Polar 120/140 Wifi, Coolsilent 90 Wifi, Cool-Eco 90A++ Wifi, Cool-Eco 120A+
Wifi
Put your air conditioner in stand-by mode. The plug is in the wall socket. Do not
press the On/Off button. Press the <SLEEP> button for 5 seconds. The Wifi light on
the air conditioner will switch from flashing slowly to rapidly. Continue with Step 3.
The Wifi light burns continuously
If the Wifi light burns continuously, a connection between the air conditioner and
the Eurom Smart App was made earlier. To reset and to re-establish a connection,
follow the same instructions as described above: switching from flashing slowly to
rapidly. Continue with Step 3 when the Wifi light flashes rapidly.
18