Getting Started; Install Filters - Philips AC4080 Mode D'emploi

3

Getting started

Install filters
The appliance comes with all filters fitted
inside. Remove the packaging of the
filters before you can use the appliance.
Remove all filters, unpack them, and place
them back into the appliance described as
follows:
Tip
•
When you remove or insert filters, place the
appliance against a wall for more stability.
Note
•
Insert the filters in the correct position.
•
Make sure that you place filter 2 in the appliance
first and then the pre-filter.
•
Make sure that the side with the tag is pointing
towards you.
1
Unlock the bottom of the front panel from
the appliance, then gently pull the top part
of the front panel towards you.
2
1
8 EN
2
To remove the pre-filter, press the two
clips down and pull the filter towards you.
3
Remove filter 2 from the appliance.
2
AC4080
4
Remove the packaging materials of filter 2.
2
AC4081