Getting Started; Installing The Filter; Setting Up The Remote Control; Using The 3-In-1: Air Purifier, Fan And Heater - Philips AMF220 Mode D'emploi

2

Getting started

Installing the filter

Note: Make sure the appliance is unplugged from the electrical outlet before installing the filter�
1
To remove the back cover, hold the side of it with both hands and pull� (fig
2 Pull the filter from the appliance (fig
3
Remove all packaging materials from the filter (fig
4 Put the filter back into the appliance (fig
5 Reattach the back cover (fig

Setting up the remote control

1
Pull out the plastic film on the remote control to activate the battery (fig
2
Pair the remote control with the appliance if you have multiple devices in one house
(see the chapter "Pairing your remote control")�
Note: Place the remote control in the slot and it snaps in place automatically
3

Using the 3-in-1: air purifier, fan and heater

Air quality light

PM2.5 level
≤ 12
13-35
36-55
> 55
)�
e
f
)�
g
)�
h
Air quality light color
Blue
Blue-purple
Purple-red
Red
d
)�
)�
i
(fig )
j
�
Air quality level
Good
Fair
Poor
Very poor
)�
EN 3