Getting Started; Installing The Filter; Wi-Fi Indicator; Wi-Fi Connection - Philips AC2936 Mode D'emploi

2 Getting started

Installing the filter

Note: Make sure the air purifier is unplugged from the electrical outlet before installing the filter�
1
Pull the back cover and remove it from the appliance (fig c)�
2
Pull the filter from the appliance (fig d)�
3
Remove all packaging materials of the air purification filter (fig e)�
4
Put the filter back into the appliance (fig f)�
5
Reattach the back cover (fig g)�

Wi-Fi indicator

Wi-Fi icon status
Blink in orange
Blink in white
Stable in white
Off

Wi-Fi connection

First timeconnection
1
Download and install the Philips "Clean Home+" app from the
App Store or Google Play�
2
Connect your smartphone or tablet to your Wi-Fi network�
3
Launch the "Clean Home+" app and click on "Connect a New
Device" or press the "+" button on the top of the screen� Follow
the onscreen instructions to connect the air purifier to your network�
Reset the Wi-Fi connection
1
Touch and
» The Wi-Fi indicator
2
Follow the steps 3 in "First time connection" section�
Note: Please check www�philips�com/cleanhome for the latest update of supported Operation
System and devices�
Wi-Fi connection status
Connecting to the smartphone
Connecting to the router
Connected to the router
Wi-Fi function disabled
for 3 seconds until you hear a beep�
blinks orange�
EN
3