Replacing The Filter; Filter Reset; Storage - Philips AC2936 Mode D'emploi

Replacing the filter

Note:
• The filter is not washable or reusable�
• Do not smell the filter as it has collected pollutants from the air�
When the filter need to be replaced, the filter replacement alert
red (fig |)�
1
Replace the filter with Philips NanoProtect filter Series 3 (FY2180/30) ,
Please follow the step of Chapter "Installing the filter"�
2
Touch the button to switch on the appliance (fig h)�
3
Touch and hold the filter status check/reset button
reset the filter cleaning time (fig })�
4
Wash your hands thoroughly after cleaning the filter (fig {)�

Filter reset

You can also replace the filter before filter replacement alert (
the screen� After replacing a filter, you need to reset the filter lifetime counter
manually�
1
Touch the power
unplug from power socket(fig h)�
2
Put the power plug in the power socket (fig ~)�
3
Within 15 seconds after power on, touch and hold
3 seconds to reset the filter lifetime counter (fig )�

5 Storage

1
Turn off the air purifier and unplug from the power socket�
2
Clean the air purifier, particle sensor and the surface of the filter (see
chapter "Cleaning and maintenance")�
3
Let all parts air dry thoroughly before storing�
4
Wrap the filter in air tight plastic bags�
5
Store the air purifier, filter in a cool, dry location�
6
Always thoroughly wash hands after handling filters�
button for 3 seconds to turn off the appliance and
lights up
for 3 seconds to
) displays on
and button for
EN
7