Set The Humidity Level; Set The Child Lock - Philips AC4080 Mode D'emploi

2
Press the timer button
choose the number of hours you want the
appliance to operate. The corresponding
timer light goes on.
To deactivate the timer function, press the timer
button repeatedly until the timer light (
) goes out.
or
Set the humidity level
Note
• Make sure that the water tank is filled with
water when you want to use the humidification
function (see the chapter "Get started", section
"Prepare for humidification").
• Press the humidity button
more times to set the desired air humidity
to 40%, 50% or 60%.
» The corresponding humidity light (40%,
50% or 60%) starts to flash.
» When the appliance reaches the target
humidity level, the humidity level
indicator remains on.
Note
•
If you want to increase the humidity level in
shorter time, you can select a higher fan speed.
repeatedly to

Set the child lock

,
•
once or
•
Note
•
Child lock is only applicable for AC4081.
Press and hold the fan speed button
and timer button simultaneously for
3 seconds to activate child lock.
3"
» When the child lock is on, all buttons
are not responsive.
Press and hold the fan speed button
and timer button simultaneously for
3 seconds again to deactivate child lock.
3"
Note
•
When the child lock is on, the appliance will not
respond when you press any button.
EN 15