Sony VPL-PX40 Mode D'emploi page 25

To adjust the volume
To mute the picture
Downloaded from:
To input from
Video equipment connected to the S VIDEO input
connector
Smart APA (Auto Pixel Alignment) adjusts the picture of the connected
equipment so that it is projected clearly.
Notes
• If "Auto Input Search" is set to "On", the projector searches for the signals from
the connected equipment and displays the input channel where the input signals
are found.
For details, see "Auto Input Search" in the SET SETTING menu on page 35.
• The smart APA is effective for the input signal from a computer only.
When the projector is connected to a notebook or a computer with a built-in
LCD screen, you may have to switch the computer to output to the projector by
pressing key and
Fn
5
Turn the zoom ring to adjust the size of the picture.
6
Turn the focus ring to adjust the focus.
Attention
Looking into the lens when projecting may cause injury to your eyes.
The volume can be adjusted in the on-screen menu. See "Volume" in the
PICTURE SETTING menu on page 33.
Press the PIC MUTING key on the Remote Commander. Press again to restore
the picture.
https://www.usersmanualguide.com/
key (such as
/
Fx
LCD
F7
Fx
or
Fn
Press INPUT to display
S VIDEO
.)
VGA
Projecting
25
GB