ROQUES LECOEUR RL9092 Manuel D'utilisation Et D'entretien page 92

(continued)
INTERVAL
Air filter and spark plugs
AFTER
50 HOURS
Lubrication
Engine, transmission,
AFTER
electromagnetic
100 HOURS
transmission
Tyres
MONTHLY
Mowing deck
Fuel filter
Battery
Travel drive belt
BEFORE THE
SEASON
Mowing deck
Front axle and steering
Engine
AFTER THE
SEASON
(PUTTING Cables
OUT OF
OPERATION)
Mowing deck
Explanations for table:
1 = Replace more frequently if the riding mower is under greater load or works in outdoor temperatures
around 35°C or higher.
2 = If the machine works in a dusty environment, perform the inspection more frequently.
3 = Perform the inspection more frequently if the machine works in a sandy environment.
4 = Perform the inspection more often if a new belt has been fitted.
N = Manual of the manufacturer, supplied with the machine.
Apart from regular maintenance according to the above table, it is necessary to replace motor
oil based on the recommendations in the manual drawn up by the engine manufacturer,
which is included with the riding mower.
6.2 DAILY CHECKS AND MAINTENANCE
- Before starting any maintenance or repair works, thoroughly reacquaint yourself with all
instructions, restrictions and recommendations in this user's manual.
- Always remove the key from the ignition and disconnect the spark plug cables before
performing any cleaning, maintenance or repairs.
- When working use suitable work clothing and work footwear. Use suitable gloves when
handling a mowing blade or for activities where there is a risk of cuts.
- Avoid spilling fuel, oils or other harmful substances.
Dispose of used oil, fuel or other hazardous substances and materials in accordance
environmental protection regulations in force.
ASSEMBLY
Inspection, replacement if necessary
Lubrication of parts according to lubrication
plan
Inspection and adjustment of motion
Inspection of pressure
Inspection of tension of the cogged blade
drive belt
Replacement
Inspection of electrolyte and cleaning
Inspection and adjustment
Inspection of tension of the cogged blade
drive belt
Inspection of the correct tension of the
mowing deck drive V-belt
Inspection and adjustment of play
Oil change
Inspection of mounting, inspection of quick
coupler parts
Cleaning
91
ACTIVITY
1,2 6.3.2
6.4
N
6.2.1
6.3.8
N
6.3.1
6.3.11
6.3.8
6.3.8
6.3.10
6.3.2
6.2.1
6.2.2