Publicité
Les langues disponibles
Les langues disponibles
1. TECHNICAL INFORMATION
1.1 Use
The AJ92 CHALLENGE machine is a two-axle self-propelled riding mower designed for mowing even,
maintained grass areas with a maximum vegetation height of 10 cm, e.g. in parks, gardens and
sports fields, possibly on minor slopes, on which there are no foreign objects (fallen branches, rocks,
solid items, etc.). The incline of the slope must not exceed 12° (21%).
Any use of this riding mower, which is not described in this user's manual and which
goes beyond the use here described is considered to be in contradiction to its
intended purpose or use. The manufacturer of the machine is not responsible for damages
arising from such use; the risk is borne by its user. The user is also responsible for adhering
to the conditions prescribed by the manufacturer for the operation, maintenance and repairs
of this machine, which may only be used, maintained and repaired by persons that
know these conditions and have been informed about possible dangers.
Only accessories, which have been approved by the manufacturer may be connected
to the machine. The use of other accessories will result in the warranty being
immediately void.
1.2 MAIN PARTS OF THE RIDING MOWER
The AJ92 riding mower consists of the following basic sections:
(1) Frame with a bumper
The frame with bumpers serves as a bearing element for most of the main parts of the
machine.
(2) Front axle with wheels including steering
The front axle enables the wheels to turn. A steering wheel is used for steering.
(3) Mowing deck
The mowing deck mows and collects the grass. It is located under the machine. It consists of
a cover, main plate and two mowing blades.
(4) Grass ejection chute
It connects the mowing deck with the grass catcher. The grass passes through it to the grass
catcher.
(5) Gear box including rear-wheel drive
The gear box with hydrostatic power transmission serves to change gears while driving.
(6) By-pass
1.2
The by-pass lever serves to engage and disengage the gear box for the rear wheels. It is
located on the rear left wheel and depending on the machine configuration, it is located either
in front of the wheel or behind the wheel.
(7) Grass catcher
The grass catcher located in the rear behind the mower, consists of a tubular metal frame,
lid, textile sack and a dump lever handle.
(8) Driver's location
The comfortable seat enables easy access to all control elements on the machine.
(9) The body, engine including electrical installations and battery
The body is a combination of plastic and metal covers which appropriately cover the electrical
and mechanical components of the machine. The four-stroke petrol engine is located under
the hood and is firmly attached to the frame. The battery is located in the storage space
under the steering wheel.
65
Publicité
