CAME BXV SDN4V Manuel D'installation, D'utilisation Et D'entretien page 58

DESCRIPTION OF PROGRAMMING COMMANDS
Display
The ESC button is for:
- exiting menus;
- cancelling changes.
- during operation it works
from a STOP command
BROWSING THE MENU
To enter the menu, keep the
ENTER button pressed for at
least one second.
To select menu items, use
the arrow keys ...
also for the submenus, use
the arrow keys to select ...
To increase or decrease a
value, use the arrow keys ...
 When the menu is active, the system cannot be used.
8 8 8
The < > keys are for:
- moving from one item to another;
- increasing or decreasing values.
- after a travel calibration they allow an OPEN or CLOSE
command
F
F
F
3
... to exit the menu, wait 10
seconds or press ESC.
The ENTER key is for:
- entering menus;
- confi rming or memorizing set values.
i
i
2
F 3
0
i
0
3 i
... then press ENTER
... then press ENTER
... the press ENTER to
confi rm ...