Factory Reset & System Updates - M18™ 500Gb Control Hub; Factory Reset - M18™ 500Gb Control Hub - Milwaukee 2970-20 Manuel De L'utilisateur

3 M18™ 500GB CONTROL HUB
3. Press the navigation dial and accept the on-screen message to continue.
CONTROL HUB INTERNAL DRIVE
CONTROL HUB THUMB DRIVE
4. The selected drive will be formatted, and the system will return to the SETTINGS
menu.
5. Press the Back
3.5 FACTORY RESET & SYSTEM UPDATES – M18™
500GB CONTROL HUB
These two tasks can be accomplished by using the M18™ 500GB CONTROL HUB and
M18™ WIRELESS MONITOR or a tablet running the Milwaukee® Pipeline Inspection
App.
3.5.1 FACTORY RESET - M18™ 500GB CONTROL HUB
Performing a factory reset will reset the M18™ 500GB CONTROL HUB to the factory
defaults.
In the CONTROL HUB, the functionality that will reset to the factory default will be:
• LABELS will be erased
• VIDEO and IMAGE settings back to default :1080P
• The COMPANY NAME is removed
• SONDE frequency back to default
• LINE TRACE back to default
• SCREEN SETTINGS back to default: Hue, Brightness, Contrast, Saturation.
• UNITS of measure
1. On the M18™ WIRELESS MONITOR, turn the navigation dial to SETTINGS
the navigation dial. Turn the navigation dial to FACTORY RESET, press the navigation
dial to enter the sub-menu.
SETTINGS
Are you sure you want to delete the files on
the disk: "CONTROL HUB INTERNAL
DRIVE"
CANCEL
key to return to the main viewing screen.
51
ERASE
, press