Using Jobs - Milwaukee 2970-20 Manuel De L'utilisateur

2 M18™ WIRELESS MONITOR
3. Main viewing area – is the majority of the LCD and shows the raw video from the
camera or videos being played back.
4. CAMERA LIGHT – of the cameras LED's are controlled here.
5. ZOOM & PAN – allows for 4 x zooming with vertical and horizontal panning of the
video feed.

2.3.1 Using JOBS

Before creating a video or image file, you can tell the system where to store the files. This
is known as creating a NEW JOB or CONTINUE EXISTING JOB. Creating a NEW JOB
will setup a container (folder) for both video and image files to be stored in. CONTINUE
EXISTING JOB will route the recordings to a JOB folder that already exists.
The system will automatically ask which JOB to use in certain situations.
1. Whenever the system clock changes to a new day. (after 11:59PM)
2. Whenever the M18™ WIRELESS MONITOR is restarted. (turned off and on again)
3. Whenever the M18™ 500GB CONTROL HUB is restarted. (turned off and on again)
When the Record button is pressed under the above situations, the SELECT JOB List
will appear with options of: NEW JOB WITH DATE AND TIME, NEW JOB WITH NAME or
EXISTING JOB. From this point on the same JOB will be used until changed.
1. Turn the navigation dial to SETTINGS
2. Turn the navigation dial to MANAGE JOBS, press the navigation dial to enter the sub-
menu.
The MANAGE JOBS sub-menu has five menu options.
a. NEW JOB WITH DATE AND TIME - Creates a NEW JOB with the systems date
and time as the prefix for all files in this folder.
b. NEW JOB WITH NAME - Creates a NEW JOB with the text title entered via the
on-screen keyboard.
c. CONTINUE EXISTING JOB – Send the new files to an EXISTING JOB previously
created.
d. EXPORT JOB – Copies the JOB from the CONTROL HUB INTERNAL DRIVE to
a CONTROL HUB THUMB DRIVE.
e. DELETE JOB – Deletes the JOB from the CONTROL HUB INTERNAL DRIVE.
NEW JOB WITH DATE AND TIME
NEW JOB WITH NAME
CONTINUE EXISTING JOB
EXPORT JOB
DELETE JOB
, press the navigation dial.
SETTINGS
26