Connection Settings - Milwaukee 2970-20 Manuel De L'utilisateur

2 M18™ WIRELESS MONITOR
30FPS
15FPS
5. After the frames per second choice is selected, the system will return to the
SETTINGS menu.
IMAGE SETTINGS
This setting allows for the choice selection of the picture IMAGE dimensions. These
dimensions will affect the picture quality, which in turn affects the size of the picture file.
Image setting choices - 1920 x 1080, 1280 x 720 or 640 x 480
Turn the navigation dial to SETTINGS
Turn the navigation dial to IMAGE SETTINGS, press to enter the sub-menu.
Use the navigation dial to navigate the dimension choices, select 1920x1080, 1280x720
or 640x480 and press the navigation dial.
After the IMAGE setting choice is selected, the system will return to the SETTINGS menu.

2.2.10 CONNECTION SETTINGS

The default connection method for M18™ WIRELESS MONITOR and M18™ 500GB
CONTROL HUB is via WI-FI. The wireless range between the two units is 500'. If an
active CONTROL HUB is within the 500' range, it will show here in the Control Hub List.
As a backup, the WIRELESS MONITOR and CONTROL HUB can be connected by using
a USB-C cable.
First-time WIRELESS MONITOR Paring
• If only one CONTROL HUB is in range, the WIRELESS MONITOR will automatically
force pair with it without any user interaction.
• If there is more than one CONTROL HUB in range, the Control Hub List will appear
on the WIRELESS MONITOR or Milwaukee® Pipeline Inspection App so the user can
choose the desired CONTROL HUB.
SETTINGS
, press the navigation dial.
20