Setting The M18™ Wireless Monitor Language; Setting The Date & Time - Milwaukee 2970-20 Manuel De L'utilisateur

2 M18™ WIRELESS MONITOR
2.2.4 Setting the M18™ WIRELESS MONITOR LANGUAGE
It is recommended to set your LANGUAGE first so that the other menus can be easily
read and understood.
1. Turn the Navigation Dial to SETTINGS
2. Turn the navigation dial to LANGUAGE, press to enter the LANGUAGE sub-menu.
SCREEN SETTINGS
DATE & TIME
UNITS
Feet
LANGUAGE
English
SYSTEM UPDATE
FACTORY RESET
ABOUT
SERVICE & SUPPORT
3. Turn the navigation dial to select the desired LANGUAGE and press the navigation
dial.
4. Turn the navigation dial and press on OK to start the LANGUAGE change.
5. The system will reboot and start in the LANGUAGE selected.
2.2.5 Setting the DATE & TIME
The system offers DATE FORMATSs of MM/DD/YYYY, DD/MM/YYYY and YYYY/MM/DD
with 12-Hour or 24-Hour TIME FORMATs.
1. Turn the navigation dial to SETTINGS
2. Turn the navigation dial to DATE & TIME, press to enter the DATE & TIME sub-menu.
3. Turn the navigation dial to DATE FORMAT, press the navigation dial. Use the
navigation dial to select the desired DATE FORMAT and press the navigation dial to
accept. Repeat the same steps selecting the TIME FORMAT.
, press the navigation dial.
SETTINGS
MANAGE JOBS
2019/05/10 6 FILES
The control modules settings have been
changed. These changes will take effect
only after the control module has been
restarted.
SETTINGS
CANCEL
, press the navigation dial.
15
OK