Factory Reset & Firmware Updates - M18™ Wireless Monitor; Factory Reset - M18™ Wireless Monitor; Firmware Updates - M18™ Wireless Monitor - Milwaukee 2970-20 Manuel De L'utilisateur

2 M18™ WIRELESS MONITOR
2.4 Factory Reset & Firmware Updates – M18™ WIRELESS
MONITOR
2.4.1 Factory Reset – M18™ WIRELESS MONITOR
Performing a factory reset will reset the M18™ WIRELESS MONITOR to the factory
defaults. On the WIRELESS MONITOR, the functionality that will reset to the factory
default will be:
• Backlight settings back to default
• WIRELESS MONITOR/CONTROL HUB connection settings
• System language
1. Turn the navigation dial to SETTINGS
2. Turn the navigation dial to FACTORY RESET, press the navigation dial to enter the
sub-menu.
3. Select FACTORY RESET WIRELESS MONITOR and press the navigation dial.
4. Read and acknowledge the factory reset message by selecting OK.
The factory reset is now complete, and the system is returned to the FACTORY RESET
sub-menu.
2.4.2 Firmware Updates – M18™ WIRELESS MONITOR
Before updating a system, go to the ABOUT section (found at the bottom of the
SETTINGS menu) of the SETTINGS menu and make a note of the current firmware
revisions in the system.
DATE & TIME
UNITS
Feet
LANGUAGE
English
SYSTEM UPGRADE
FACTORY RESET
ABOUT
SERVICE & SUPPORT
System information is shown in the About screen
Do you want to factory reset the Wireless
Monitor?
Cancel
SETTINGS
MANAGE JOBS
2019/05/10 6 FILES
WIRELESS MONITOR SERIAL NUMBER:
WIRELESS MONITOR FIRMWARE VERSION:
CONTROL HUB SERIAL NUMBER:
CONTROL HUB FIRMWARE VERSION:
DISMISS
44
, press the navigation dial.
OK
1029384756
1.0.0.1106
102938ED3B
1.0.0.1106