Creating A Video Recording And Image Capturing - Milwaukee 2970-20 Manuel De L'utilisateur

2 M18™ WIRELESS MONITOR
3. Use the navigation dial to navigate the menu choices. Press the navigation dial to
enter the desired sub-menu.
4. Scroll to the bottom of the sub-menu and press the navigation dial on OK to accept the
final changes.
The changes will be saved into memory, and the system will return to the main viewing
screen.
Creating a NEW JOB
1. From the JOB's sub-menu use the navigation dial to select NEW JOB WITH DATE
AND TIME or NEW JOB WITH NAME.
If NEW JOB WITH DATE AND TIME is selected a JOB folder with the system current
date and time will be created and named YYYY_MM_DD_HH_MM_SS.
If a NEW JOB WITH NAME is selected, the next screen will be the on-screen
keyboard.
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
SPACE
2. Use the navigation dial to enter the name of the NEW JOB WITH NAME.
3. When finished entering the new job name use the navigation dial to ENTER and press
the dial.
4. Use the navigation dial to select SAVE and press the navigation dial.
When a NEW JOB WITH NAME is selected a JOB folder with the system current date
and time will be used as a prefix. The folder created and named YYYY_MM_DD_NEW
JOB NAME.

2.3.2 Creating a Video Recording and Image Capturing

By default, all videos and images recorded are saved to the M18™ 500 GB CONTROL
HUB INTERNAL DRIVE. If a thumb drive is plugged into the CONTROL HUB, all videos
and pictures can be saved to both the CONTROL HUB INTERNAL DRIVE and CONTROL
HUB THUMB DRIVE.
Filenames – the file names are automatically created by the system and consist of the
year, month, day, time created, and or JOB name. This will vary depending on the JOB
type selected.
If selecting NEW JOB WITH DATE AND TIME, the filename will look like this:
2019_10_01_12_50_10_2
2019 = Year, _10 = Month, _01 = Day, _12 = Hour, _50 = Minutes, _10 = Seconds and _2
= second file created.
MT2019_A
1 2 3 4 5 6 7 8 9 0 . , - ? !
MT2019_A
CANCEL
DELETE
SAVE
27
ENTER