M18™ Battery - Milwaukee 2970-20 Manuel De L'utilisateur

2 M18™ WIRELESS MONITOR
USB-C Cable Connection – The M18™ WIRELESS MONITOR can also be powered
by the M18™ 500GB CONTROL HUB battery via the supplied USB-C cable. This is
extremely useful in some emergency situations in case your battery runs low.
1. With the supplied USB-C cable, plug one end into the CONTROL HUB and the other
into the WIRELESS MONITOR.
2. Confirm the USB-C connection by checking the icons in the status bar on the right.
When connected by USB-C cable the WI-FI icon is now replaced by the cable-connect
icon.
2019/10/23 01:47:57 AM
The above illustration shows the WIRELESS MONITOR and CONTROL HUB connected
by WI-FI with a weak monitor battery.
2019/10/23 01:47:57 AM
The above illustration shows the WIRELESS MONITOR and CONTROL HUB connected
by USB-C cable with the M18™ battery removed from the WIRELESS MONITOR. The
WI-FI icon is replaced by the cable-connect icon and the WIRELESS MONITOR battery
shows as empty.
2.2.11 M18™ BATTERY
Both the M18™ WIRELESS MONITOR and M18™ CONTROL HUB are powered by an
M18™ BATTERY. The battery condition of both is always shown in the status bar on the
WIRELESS MONITOR screen.
Recharge only with the charger specified for the battery. For specific
charging instructions, read the operator's manual supplied with your charger and
battery.
2019/10/23 01:47:57 AM
CAMERA LIGHT CAMERA LIGHT
CAMERA LIGHT
CAMERA LIGHT CAMERA LIGHT
Battery status – the icon to the left of the WIRELESS MONITOR
icon represents the battery status of the CONTROL HUB while the
icon to the right represents the WIRELESS MONITOR.
23
9.3FT
9.3FT
9.3FT