Dometic PerfectView CAM 44 NAV Instructions De Montage Et De Service page 26

Using the camera
9 Using the camera
9.1 Estimating distances
The camera produces three distance marks in reversing mode which are shown on a
connected colour monitor as coloured lines (fig. p, page 10).
The lines make it easier to estimate the distance of the vehicle to an obstacle.
When the camera is installed at a height of approx. 230 – 250 cm, the lines show the
following distances:
Colour Distance
Green (A) approx. 3 m
Yellow (B) approx. 1 m
Red (C) approx. 0.3 m
10 Cleaning and caring for the camera
A
NOTICE!
Do not use any sharp or hard objects for cleaning since they may
damage the device.
➤ Clean the camera with a soft, damp cloth from time to time.
11 Guarantee
The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the
addresses) or your retailer.
For repair and guarantee processing, please send the following items:
• Defect components
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
26
CAM44
EN