Publicité
Les langues disponibles
Les langues disponibles
The following protective equipment must be worn when changing the product
container:
Chemical resistant protective gloves
Chemical-resistant protective gloves are used to protect the hands against
aggressive chemicals.
Protective goggles
Protective eyewear protects the eyes against flying parts and liquid splashes.
Changing the product container:
1.
Switch off the unit
2.
Remove the empty product container from its position in the unit.
3.
Lift the suction lance with the conical suction lance adapter out of product container
and leave to drip dry.
4.
Once the suction lance has dripped dry, remove it from the product container.
5.
Place the new product container next to the product container to be changed and
open the new container.
41710225´7, 1, en_GB
ENVIRONMENT!
Danger to the environment caused by contamination of the water
network with the product/agent!
Environmental damage may be caused by contamination of the water
network with the product/agent! Dispose of the product/agent residues
properly.
No further adjustment of the suction lance is required if the product
containers are the same.
If the size of the container has changed, either the position of the conical
suction lance adapter needs to be adjusted by moving it or another
suction lance needs to be selected.
CAUTION!
Risk from using non-validated products!
Using unauthorised cleaning agents can damage the sealing materials of
the unit and render the unit unusable.
Using non-validated products increases the risk to the operating
personnel.
33
Operation
Changing the product container
Rev. 03-01.2017
Publicité
