Ecolab DM Modular 20 Mode D'emploi page 68

Control / Visualisation
Operating level > Cleaning mode
4.4.1.4 Beverage mode – Cleaning interval reached – „Beer Cut"
Fig. 9: Beverage mode – Cleaning interval reached – „Beer Cut"
1 Cleaning intervall reached.
2 Days to the „Beer-Cut" .
3
Activates "Cleaning mode"
4
Activates "Rinsing mode"
If the cleaning interval has been reached and the „Beer Cut" has also been set, the
remaining days Fig. 9, pos. 2, are also displayed. At the end of the countdown the "Alarm
– No cleaning"
4.4.2 Cleaning mode
By calling up the "Cleaning mode" function
mode" on page 22, Fig. 7, pos. 3, the display message changes and cleaning can be
started.
Fig. 10: Cleaning mode - schema 1
The "Cleaning mode" is activated by pressing [OK] key.
The "Cleaning mode" is cancelled by pressing the [ESC] key and the display is changing
to previous display.
Fig. 11: Cleaning mode - schema 2
The water valve is opened.
Rev. 03-01.2017
Ä Chapter 4.4.2 „Cleaning mode" on page 24.
Ä Chapter 4.4.3 „Rinsing mode" on page 27.
Ä Chapter 4.5.3 „Alarm - No Cleaning" on page 30 is activated.
Ä Chapter 4.4.1 „Beverage
24 41710225´7, 1, en_GB