Ecolab DM Modular 20 Mode D'emploi page 72

Control / Visualisation
Operating level > Rinsing mode
Fig. 22: Rinsing mode - schema 5
If the mixing container is empty, the time stops and the mixing container is refilled.
Fig. 23: Rinsing mode - schema 6
At the end of the rinsing time, the menu is displayed and the display flashes, alternating
between blue and white. The rinsing process is continued until the next mode is selected.
By pressing the "Serving" key
Ä Chapter 4.4.1 „Beverage mode" on page 22.
Fig. 24: Rinsing mode - schema 7
If the mixing container is not empty, the menu is not shown in the display.
"Beverage mode" is activated after the mixing container has been emptied
Ä Chapter 4.4.1 „Beverage mode" on page 22.
Rev. 03-01.2017
the unit goes into "beverage mode"
28 41710225´7, 1, en_GB