Ecolab DM Modular 20 Mode D'emploi page 70

Control / Visualisation
Operating level > Cleaning mode
Fig. 16: Cleaning mode - schema 7
At the end of the cleaning time, the menu is displayed and the display flashes, alternating
between yellow and white. The cleaning process is continued until the next mode is
selected.
Fig. 17: Cleaning mode - schema 8
Alarm – No detergent
If there is no detergent detected in the mixing container during cleaning, the process is
interrupted. Before cleaning can be started again, the detergent container and p-pump
must be checked. The display flashes, alternating between red and yellow.
Rev. 03-01.2017 26 41710225´7, 1, en_GB