Ecolab DM Modular 20 Mode D'emploi page 66

Control / Visualisation
Operating level > Beverage mode
4.4 Operating level
4.4.1 Beverage mode
4.4.1.1 Beverage mode: initial start-up / reset
Fig. 5: Beverage mode: initial start-up / reset
1 Fill level of mixing container
2 Cleaning intervall reached.
3
key: last cleaning
4 Days until „ Beer-Cut"
5
Activates "Cleaning mode"
6
Activates "Rinsing mode"
Display of "last cleaning"
There are no cleaning protocols at initial start up or reset. In this case, the user can set
the weeks (0-8) since last cleaning.
Fig. 6: Display of last "cleaning"
1. After pressing "last cleaning" key
2. In field "weeks" the following settings can be done:
0 = cleaning today, 1 = cleaning a week ago, 2 = cleaning two week ago and so on
up to 8 = cleaning was eight weeks ago.
Rev. 03-01.2017
Ä Chapter 4.4.2 „Cleaning mode" on page 24.
Ä Chapter 4.4.3 „Rinsing mode" on page 27.
the display change to "last cleaning".
22 41710225´7, 1, en_GB